"Administration > Configuration"
•"User Mode": See Standard Mode versus Expert Mode.
•"Predefined Data": Filter for the following lists:
·Process curve sets ("Administration > Process Curve Sets")
·Types of printing material ("Administration > Print Parameters > Types of Printing Materials")
Only the ISO standards and user-defined items display if the box has a tick.
•"Unit": Units of measure (Inch and Metric) for resolution and screen frequency. A change in the unit of measure will be applied only after a dialog is opened again.
"Dot Gain Display": Display of the Y axis in the graphic editor. A change will be applied only after a calibration data record or a process curve is opened again.
·"Dynamic Y Axis"
The Y axis is set as required to values of 10%, 20% ... 100%.
·"50%, 100%"
The Y axis is set as required to 50% or 100%.
·"Static Y Axis"
The Y axis is set to 100%.
·Master Data Server (MDS): Shows the master data server that is used or in Calibration Tool allows configuration of the master data server to be used. The print parameters and process curve sets are synchronized automatically with the master data database.