Example of Measuring Data with Hand-held Instru­ments

IconNote00095.png

Note: You must calibrate GretagMacbeth EyeOne before you start measuring.

IconNote00096.png

Note: Techkon R410/R410e are operated via a unidirectional connection to the application. In other words, messages or commands are not checked for implementation or feasibility.

IconNote00097.png

Note: GretagMacbeth SpectroEye has a built-in polarization filter that you can enable/dis­able with the "Polfilter" list box as required.

IconNote00098.png

Note: Calibration of the Techkon R410/R410e and Gretag Macbeth D19C/D196 cannot be done with the Calibration Manager. Follow the calibration instructions in the respective manuals of the manufacturers.

IconNote00099.png

Note: The CCDot dotmeter automatically switches to the energy-saving mode (in this case, the display doesn't show anything) and is then not detected by the Calibration Manager. To make the device operational again, press the measuring button.

X-Rite 528 is used in this documentation to explain the measuring procedure.