Upgrading Prinect 2015 to Prinect 2016
Before You Start the Remote Upgrade
Prerequisite: Prinect 2015 is up and running.
Before you upgrade your system, make sure that the following items are done:
•"Verify via DB_Service Tool (MSSQL) > System > DB Sysconfig whether the Prinect Analyze Point database is set to 'MSSQL'. 'Database ID Analyze Point' must be set to 'MSSQL'."
•"All platesetters connected through Prinect output software were switched on."
Upgrade of Common Database Oracle
Stop Services
1.If you have a Content System, stop these services:
Heidelberg Content System Bridge Service
Heidelberg Content System Service
Heidelberg Synchronizer Service
2.Don't start the DB_Service tool.
Start CDB Oracle Update
1.Read through the Release Notes carefully.
2.Login as local Administrator or as Domain User.
3.Run "Prinect Common Database Oracle 2016" from "SetupPrinect.exe" on the USB stick.
(Prinect 2016 Add-on & Maintenance Products/Prinect Common Database Oracle 2016)
Prerequisites:
Your Prinect system is successfully upgraded.
Available updates are installed.
Prinect 2016 is up and running.
You have an Archive System on Oracle, but don’t have a Content System
Prinect Archive System 2016 based on Oracle (without Prinect Content System) needs to be migrated from Oracle to MSSQL. As already known from previous versions, here too, Heidelberg is using the ORACLE-MSSQL_Migration tool (updated version).
Please note that the officially released Media Kit of Prinect 2016 does not contain the latest version of the migration tool, as a result migration might fail.
Please download the latest migration tool,
ORACLE-MSSQL_Migration_16.00.16.003.exe or higher, from our FTP server: (/ctp_prinect/se_download/Prinect_2016/99_Hotfixes/PrinectArchiveSystem)
Installations using Prinect Archive System together with Prinect Content System will remain on Oracle
If you have installed Content System, skip this section and proceed with Content System, Content System Link, Content System Monitor.
After successful migration perform the following steps:
1.Uninstall Oracle if it is not used any longer! Below are the known scenarios where Oracle is no longer needed. This process is described in the DB migration documentation.
•A Prepress Manager or Integration Manager is installed.
•Without Content System (remains on Oracle, in this case Archive System remains on Oracle as well)
2.Double-click on "Heidelberg Common Database Oracle 16.xx.xxx" in "Add & Remove programs" in the "Control Panel" and remove this product.
3.Reboot the server.
4.After the reboot you have to delete two folders manually: "X:\Oracle" and "Y:\db_backup".
Caution: Please pay close attention not to delete the new folder with the same name for MS-SQL!
Content System, Content System Link, Content System Monitor
If you have not installed Content System, skip this section and proceed with Package Designer (PD).
1.Content System Update - Part 1 of 3 on the Content System Server
•Stop all Content System services and close Content System Service Control
•Check/Start "OracleHEIDB_11g_HomeTNSListener" Service.
•Check/Start "OracleServiceHEIDB" Service.
•Run "Install Prinect Content System 2016" from "SetupPrinect.exe" on the USB stick.
(Prinect 2016 Add-ons/Prinect Content System 2016)
2.Content System Update - Part 2 of 3 on the Content System File Server:
•Run "Install Prinect Content System Monitor 2016" from "SetupPrinect.exe" on the USB stick.
3.Content System Update - Part 3 of 3 on the Prinect Prepress Manager/Integration Manager:
•Run "Install Prinect Content System Link 2016" from "SetupPrinect.exe" on the USB stick.
(Prinect 2016 Add-ons/Prinect Content System 2016)
•Stop and start the Prinect System with the Supervisor UI (PMC)
Note: This is a stand-alone product. It can be installed anytime after Remote Upgrade to 2016.
Run "Install Prinect Package Designer 2016" from "SetupPrinect.exe" on the USB stick (Prinect 2016 Add-ons/Prinect Package Designer 2016)
Prinect Mobile (PM)
Note: This is a stand-alone product. It can be installed anytime after Remote Upgrade to 2016.
Run "PrinectMobileSetup.exe" from %HD_STD_USERDATA%PTConfig\Installer.
Prepress Interface (PPI)
Upgrade delivered with Prinect 2016 USB stick\Prinect Prepress Interface.
Prepress Interface Service (PPIS)
Upgrade delivered with Prinect 2016 USB stick\Prinect Prepress Interface.
Prinect Business Manager
Upgrade delivered with Prinect 2016 USB stick\Prinect Business Manager.
Prinect Business Manager Portal (PBMP)
Upgrade delivered with Prinect 2016 USB stick\Prinect Business Manager.
Dipco & CTP Tools (DIPCO)
No installation necessary for these products. These products are installed by the Prinect Signa Station 16 Installer to
"C:\Program Files\Heidelberg\Prinect Signa Station 16\Marks"
Stahlfolder Connector Service (SFCS)
Run "StahlFolderConnectorSetup.exe" from %HD_STD_USERDATA%PTConfig\Installer
MetaDimension Remote Printmanager (MDPM)
The software is part of the MetaDimension application software and is located in:
"C:\Program Files (x86)\Heidelberg\MetaDimension\HD_Installer"
PSC Editor (Paper Stretch Compensation)
The software is part of the MetaDimension application software and is located in:
"C:\Program Files (x86)\Heidelberg\MetaDimension\HD_Installer"
TIFF Toolbox (MDTT)
The software is part of the Prinect Shooter application software and is located in:
"C:\Program Files (x86)\Heidelberg\Prinect Shooter\HD_Installer".