Inline calibration allows you to quickly and easily adapt the calibration of your papers to changing conditions.

In this video, we use an example to show you how to create the basic calibration for an inline calibration.

Measuring the test charts differs, depending on the press type, the paper format, and the measuring device used. In this video we will show how to proceed in a specific case.

Errors can occur when working with the X-Rite i1 Pro. We will show you how to deal with three common problems.

This video tutorial guides you through the entire process of substrate qualification with the Prinect Color Center. All the steps will be shown, beginning with creating a new output condition, then determining the ink limit by way of example, right up to the concluding substrate check.

The output condition will be created for a Labelfire and all test chart measurements will be run with the i1 iSiS 2. (Color Center 2018 version).

In contrast to the test charts for creating profiles, the dot gain strips that must be printed and measured when determining the ink limit or during calibration can be measured with the X-Rite Eye-One (strip), a simple hand-held instrument with a scanning ruler.