X-Rite i1 iSis 2

You can use the X-Rite i1 iSis 2 to automatically measure large A4 and A3 test charts as well as strips distributed on three charts from web presses (e.g. "IT874_Visual_iSis_1_3", "..._2_3", "..._3_3").

You have to cut A3 test charts and test chart strips to size before they are scanned. Remember the following items when cutting to size:

•Cut the test charts as straight as possible.

•Cut approx. 2 mm on the outside beside the broken lines of the test charts. The broken lines may not be cut.

IconNote00018.png

Note: With the XL version of the X-Rite i1 iSis 2, you can read in sheets up to A3+/US Tab­loid without cutting them to size.

IconPrerequisite00019.png

Prerequisites:
- The USB driver for the X-Rite Eye-One iSis is installed on the Color Toolbox computer.
- The X-Rite is connected to the power supply and switched on.
- The X-Rite is connected to the Color Toolbox computer via a USB cable.

Have a look at the video tutorial named "Color Toolbox & X-Rite i1 iSis 2" for a visual description of the topic.

IconNote00020.png

Note: X-Rite i1 iSis 1 is no longer supported (the manufacturer discontinued support on Oct. 31, 2022). Although measuring is still possible with this device, we do not recommend to do this because of the potentially poor quality of measurements.