Gallus

Labelfire

Rendering for these machines is possible directly in Prinect Production /Prinect Digital Print.

Jetfire machines are configured partly in Prinect Cockpit and partly in the Jetfire front end.

HEIDELBERG Jetfire

Jetfire 50

Versafire LP/LV

Versafire LP/LV

Versafire EM

Versafire EM

Versafire CV/EV

Versafire CV/EV
(formerly Linoprint CV)

Versafire CP/EP

Versafire CP/EP
(formerly Linoprint CP)

Linoprint C

Linoprint C751

Linoprint C901

HEIDELBERG JDF Engine Interface

Various

This device type is used to connect third-party machines that have a JDF/JMF interface.

Generic

Various

This device type is used to connect third-party machines that do not have a JDF/JMF interface.

Generic
Platesetter

Platesetter

This device type is intended for small-format platesetters for outputting PDF sheets. It is suitable for a simple offset workflow.

Canon

Canon

To connect, the Fiery System 9 or 10 is required

HP Indigo

HP

To connect, the HP SmartStream Production Pro Server or a machine with the HP Onboard Server is required.

Konica Minolta

Konica Minolta AccurioPRESS C2060

To connect, the Fiery System 9 or 10 or IC-603 is required

Konica Minolta AccurioPRESS C2060

Konica Minolta AccurioPRESS C2060L

Konica Minolta bizhub PRO C754

Konica Minolta bizhub PRO C70hc

Konica Minolta bizhub PRESS C70hc

Konica Minolta bizhub PRO C6000

Konica Minolta bizhub PRO C7000

Konica Minolta bizhub PRESS C6000

Konica Minolta bizhub PRESS C8000

Kodak Nexpress

Nexpress

Nexpress machines do not report back any data like machine status, quantities and progress messages.

Ricoh Totalflow

Ricoh Pro C7100 series

Ricoh Totalflow uses a different Digital Front End compared to the "Ricoh" connection. With Ricoh Total Flow, the finishers are driven like in the case of Versafire machines.

Ricoh Pro C9100 series

Ricoh Pro VC60000

Ricoh

Ricoh

To connect, you need the Fiery System 9 or 10

Xerox

Xerox

To connect, you need either the Fiery System 9 or 10, or the Freeflow JMF Service