Labelfire Primefire

 

 

Ink Limit 

 

noTw_Label_02.png

 

noTw_Prime_06.png

 

 

An optimal amount of ink is set for each color in this step.

As of a certain point, using more ink does not increase the tonal value. To save ink and prevent the printed layer from becoming unnecessarily thick, the ink must be restricted to a reasonable amount.

 

IconNote00006.png

Note: On the Primefire, this step is available only in the expert mode. See General settings: Expert Mode. Normal users do not have to measure the ink limit. Instead, fixed values are used. These are 3.1 pl for the process colors CMKOVG and 2.7 pl for yellow.

 

The Assistant will guide you through the following steps:

1.Print Test Chart

2.Measure Test Chart

3.Calculate Ink Limit

4.Ink limit done