How do I establish a connection between Prinect Integration and the Prinect Press Center?

In order for Prinect Integration to send the job data to the Press, a connection to the Prinect Press Center must be established. In order to ensure that this connection is clearly defined, a unique "Workplace ID" is assigned to each press, both in the Prinect Press Center and in the Central Device Manager (CDM) of the Prinect Cockpit.

Note: The following section describes how to connect a Prinect Press Center press online.

Procedure

​1.​In the Prinect Cockpit, create a new "CDM device" in the "Administration > System" view in the "CDM" (Central Device Manager) area. To do this, start the Device Assistant. See Creating a New Device with the Device Assistant.

​2.​Configure the "Workplace Interface" data storage on the Prinect Press Center. See Configure the "Workplace Interface" data storage in the Prinect Press Center.

​• Synchronize the configuration of the production data collection between the Prinect workflow and the press. See Synchronization of the PDC configuration with the press.

​• Configure the export of color data on the Prinect Press Center. See Configure the color data export on Prinect Press Center (only applies to Prinect Axis Control II and Prinect Inpress Control color measuring systems).