In the "Platemaking" planning step, select the platemaking sequence for platemaking. If no sequence was defined so far, the Planning Assistant automatically selects the first suitable ImpositionOutput sequence from the sequence templates (sorted by name). All suitable ImpositionOutput sequences are presented for selection in the "Sequence" list box.
The "Work Style" column only displays if there is no Prinect Prepress module but a third-party prepress system is connected.
Context menu
You can invoke or run more editing functions in the context menu. To invoke the context menu, select an operation and click right. The context menu has the following functions:
Context menu command | Function |
|---|---|
Split Separations | You can divide up the color separations among several operations if you plan to print more than one separation in an operation. Select the operation you want and in the context menu click "Split Separations". The "Split Separations" window opens. This is where you can click the color separations that will be assigned to a new, subsequent operation. You can also select a different press for the new operation in the "Machine" list box. Confirm the dialog with "OK". Note: The list box shows only presses that are located in the same machine cluster. This ensures that the print format of the newly selected press is suitable for the job in question. For information on clusters, refer to: Clusters. |
Merge Separations | You can merge the printing of separations to output them in one operation. Select the operations in question and invoke the context menu command "Merge Separations". "Sequence" / "Machine" list box This is where you can select the sequence and the press for this sequence. If allowance, setup time and production times are set up for the selected machine in the Device Assistant, then this data is set by default in the input boxes. For information about the machine setup in the Device Assistant, go to "Administration" > "System" > "[name of Prinect server]" > "CDM" > "selected machine" > Edit" in the context menu. The "SheetfedPrinting" sequence will be selected automatically based on the parameters. |
Split Amounts | The selected operation is split into two equal operations. As a result, the total amount of print products can be split and produced in parallel on several machines. Note: If you want to print on several offset presses at the same time, you must ensure that several sets of printing plates are produced accordingly. |
Production > delegate | The selected operation is removed from the planning for processing the current job and executed in another job, i.e. the operation is "delegated" to another job. This can be useful for processing gang jobs, for example. Delegated operations are dimmed. Please note that delegated operations are not automatically assigned to another job, but must be assigned manually. |
Production > execute | An operation set to "delegate" is reset to "execute " again and is included in the job planning again. |
Remove | The selected operation is removed from planning and deleted ultimately. |
"Sequence" list box
This is where you select the ImpositionOutput sequence for planning. If you select several sheets at the same time, you can assign the same output sequence to all of these sheets.
Click "Finish" when you completed all steps of the Planning Assistant. This will save all settings, complete planning and close the "Planning Assistant" window.
Privacy Policy | Imprint | Prinect Know How | Prinect Release Notes