The "Tools" menu is found in all the main functions and contains the following functions:
•Tools > Color calculator: You can use the color calculator to view color data and tonal values calculated using profile conversion tables.
•Tools > DeviceLink Profile: Two CMYK device profiles are connected to a DeviceLink profile in this dialog.
•Tools > Profile smoothing: Press profiles are smoothed with a low-pass filter in this dialog.
•Tools > Process parameters: You can define the printing process parameters (data about output device, type of paper, process color, screening and plate).
•Tools > Ink Limit Calculation: You can open and edit measured data to determine the values for ink limit.
•Tools > Spot color control strips: You can create custom control strips for use as reference data in "Control strip > User-defined" in the "Color Toolbox - New measurement file" dialog.
•Tools > 3D spot color view: You can select a reference profile and a color table for the mapping of spot colors in the 3D view.
•Tools > Gray balance calibration: In this dialog, you calculate gray balance data for gray balance calibration in the Calibration Manager.
•Tools > Gray balance optimization: In this dialog, you calculate gray balance data for gray balance optimization in the Calibration Manager.