Logout

You will be logged out of the PMC. To log in again, you must enter your PMC username and password.

Restart

The PMC is restarted, i.e. the user interface is closed, and the services required for operation are stopped and restarted. After the command is invoked, you must confirm the restart. After the restart, you will need to log in to the PMC again.

Search for New Software

Normally, searching for new software takes place once a day at a specific time. This command triggers the immediate search for new software. An appropriate request is sent to the PSC. If new Prinect software is found, it is downloaded and is then available for installation in the "Software Update" view. See Search for New Software.

Loaded Software

The "Loaded Software" window opens. All software products or update packages installed in the Prinect system environment or that are to be installed are displayed. See The "Loaded Software" window.

Data Transfers

The "Data Transfers" window opens. All update packages that are currently being downloaded are shown here. When a download is complete, it is no longer listed in this window, but the downloaded software appears in the "Loaded Software" window. See The "Data Transfers" window.

Licensing State

The "Licensing State" window opens. Here you will find a license overview for the installed Prinect components. This window is useful if there are problems with the licensing state. If necessary, you can extend the operating license of non-functioning licenses. See The "Licensing State" window.

Starting the connection test

With the connection test you check the status of the HEIDELBERG Connection. You can also start the connection test in the "Administration > HEIDELBERG Connection" area. See HEIDELBERG Connection test (6).

Send Message

The "Send Message" window opens. Here you can enter a text message and broadcast it to selected computers in the Prinect system environment. See The "Send Message" window.

Download HTTPS certificate

You need so-called "certificates" separately issued for every HTTPS server to use the secure HTTPS connections. With this function, you can download the required certificates from Prinect Software Center to the local computer. See The "Certificate Management" window.

Note: Trusted computers within the Prinect system environment will automatically install the required security certificate. See Trust (4).